Enable acess of internet connected to a VPN

nano /etc/sysctl.conf

Add or find and comment out the following line

net.ipv4.ip_forward=1

Save, close the file and run the following command to make the changes take effect.

sysctl -p

-------------

The following iptables firewall rules allow port 1723, GRE and perform NAT

iptables -I INPUT -p tcp --dport 1723 -m state --state NEW -j ACCEPT
iptables -I INPUT -p gre -j ACCEPT
iptables -t nat -I POSTROUTING -o eth0 -j MASQUERADE

In the last rule replace “eth0″ with the interface connecting to the internet on your VPN server. Finally the following rule is required to ensure websites load properly

iptables -I FORWARD -p tcp --tcp-flags SYN,RST SYN -s 172.20.1.0/24 -j TCPMSS  --clamp-mss-to-pmtu

Replace 172.20.1.0/24 with the IP address range used in the “remoteip” option in the /etc/pptpd.conf this firewall rule is used to ensure a proper MTU value is used to prevent fragmentation.